Cleaning Misting Nozzles
Cleaning your misting nozzles:
You filter your water as much as possible, but the occasional clog from debris or hard water deposits is part of owning a misting system. Misting nozzles, misting filters, how do we clean all of these items?
Usually, removing the nozzle from the system, tapping on a hard surface, and a quick rinse will do the trick, especially for debris clogs. But not always.
To remove hard water deposits in your misting systems nozzles, try this:
- Remove the clogged nozzle from the system.
- Remove the O-ring from the misting nozzle.
- Soak the clogged misting nozzle or misting nozzles in white vinegar or CLR for at least an hour.
- Rinse the misting nozzle, flush your misting lines and mount the misting nozzles back into your misting system.
- If you cannot remember the last time you replaced your misting system filter, its probably time to replace it. To find out how to replace the filter visit our blog on DIY service
Tags: cleaning misting nozzles, misting nozzles, misting system parts